Automatic bubble film machine manufacturer: This series of bubble film machine can produce single or double layer bubble film machine between 500 mm and 1800 mm with raw materials. The main products are automatic high-speed film machine, high-speed film machine, polyethylene composite film forming machine, double layer film machine, multi-layer film machine and other film machine equipment.
Automatic bubble film machine manufacturer: After maintenance, what impact will the bubble film opportunity have on the later work
1. Check the power supply, vacuum system, air pressure system and cooling system before each start. After the device is started, check whether the rotation direction of each rotating component is correct. Usually pay attention to check the lubrication of all lubrication parts, electrical instruments should be maintained as required.
2. The equipment should be operated by specialized personnel. Do not let the extruder screw idle without material to avoid scratching the screw and barrel. After the shutdown, if there is material storage in the barrel, before starting again, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and it can be started for more than 30 minutes. It is strictly prohibited to start before the temperature does not meet the requirements, so as not to damage the parts.
3. When feeding in the hopper, it must be kept clean, and metal impurities, sand and small tools must be strictly prevented from entering the feed port, so as not to damage the cylinder and screw. If you find any abnormal noise during operation, stop the machine immediately.
Automatic bubble film machine manufacturer: the daily maintenance method of the film blowing machine
What are the daily maintenance methods of the film blowing machine? Any machine needs proper maintenance, just like regular maintenance of ordinary cars, so the maintenance of the film blowing machine is particularly important. Normal maintenance operations should focus on the following aspects:
1. Place the sealing machine on a ventilated hard ground, and keep the room temperature at 25 on working days.
2. Every two days of operation, all moving parts, especially gears, bearings and gearboxes, should be added No. 6 oil.
3. Timely dust removal to keep the machine clean. Do not unplug or drop the power supply during production. Cover the power supply with cloth.
4. If the running time is too long, please turn on the cooling fan before closing, and then turn it off after the temperature drops, because closing without cooling will only destroy the high temperature zone
5. Dust and dirt should be removed in time in the high temperature area to ensure the sealing quality.
6. Parts with serious wear should be replaced in time to extend the service life of the whole machine.
