Daily Operation And Maintenance Of Stretching Film Machine

Before using the stretching film machine, potential safety issues must be ruled out. At the same time, check whether the data is normal, whether the voltage is normal, and whether the current is normal. Then turn on the power switch of the hydraulic system of the stretching film machine, and check whether the oil level and pressure gauge readings of the main hydraulic drive system are correct and stable. Open the air shut-off valve of the slitter again to check if the air pressure is correct and stable. Afterwards, according to the setting control of the paper tube machine of the slitting machine and the type, thickness, length, width, etc. of the film placed in the slitting plan, set the slitting menu. Extract the corresponding stretch film file from the PDF. Set the rewind length and width of the film according to the corresponding specifications. Select the corresponding winding station, adjust the roller arms and rollers, and install the corresponding specifications of paper cores. Then, feed the slitting paper core machine to pass the wire through the film. Z is the start-up operation and usage control of the stretching film machine.

Three layer co extrusion rotary head blown film composite unit

Daily operation and maintenance of stretching film machine:

Before starting up, it is necessary to check the system to ensure that everything is normal.

2. The equipment must be operated by personnel. It is not allowed to idle the extruder screw without material to avoid scratching the screw and barrel.

3. For some reason, removing the screw from the barrel requires appropriate handling to prevent deformation. If it is not placed back into the barrel for a long time, it is necessary to hang the screws vertically to prevent scratches, bending, and deformation. The barrel and screw surfaces are coated with rust proof oil.

In addition to daily maintenance, you should also perform regular maintenance.