What is the normal operation method of bubble film machine? When operating the bubble film machine, it is very important to master the correct operation method, then what is the correct operation method of the bubble film machine? Let's take a look.
1. Check and control the proportion of raw materials, mix evenly.
2. Check whether the temperature control of the composite bubble film machine is good, whether the heating appliance is in good condition, and pay attention to timely adjusting the heating temperature of each point within the target range.
3. Observe and adjust the uniformity of film thickness, and the folding diameter meets the standard.
4. Check whether there are impurities on the raw materials of the composite bubble film machine, especially the iron mixed with magnets.
5. Regularly check the temperature rise of the motor running the composite bubble film machine and the transmission of the bubble film machine.
6. Check the traction speed and control film thickness.
7. Check the pressure of the storage tank of the composite bubble film machine, not too high, but there should be a backup pressure.
8. Check the lubrication of the reducer and the air compressor cylinder.
Therefore, when operating the bubble film machine, these details must be done to ensure its good performance.
What are the operation details of the bubble film machine? The correct operation of the bubble film machine affects its service life, so it is necessary to master some operational details of the bubble film machine. Let's follow Xiaobian together to understand what the operational details are.
1. Check the speed and control the thickness of the film, so that there is no deviation in the production process and the quality can be improved.
2. Testing the temperature rise and mechanical transmission of each running motor is necessary to ensure normal production.
3. Check the working temperature regularly. If the temperature is abnormal, handle it in time.
4. Observe whether the thickness of the film is uniform, whether the width of the film blowing machine is deviated, and adjust it in time.
5. Check the lubrication of the gearbox and air compressor cylinder when starting.
