Common problems and solutions for bubble film machines
Reasons for and corresponding solutions to the lack of current in bubble film machines
1. Power switch problem
If the bubble film machine has no current, first check whether the power switch is turned on. Some novices tend to forget to turn on the power switch, or press the wrong switch, resulting in the inability to start the bubble film machine. Before using, be sure to confirm that the power switch is on.
2. Power cord problem
The lack of current in the bubble film machine may also be caused by poor contact of the power cord. In this case, you need to first check whether the power cord is properly connected. If the connection is normal, check whether the power cord is disconnected or burned. If this is the case, you need to replace the power cord with a new one.
3. Fault problem
If the above two methods cannot solve the problem of the bubble film machine having no current, it may be a fault inside the machine. You can try to check whether the circuit inside the bubble film machine is loose or detached, and find the fault point for repair. If you are not a professional, it is recommended to seek professional repair services.
Reasons and solutions for the bubble film inflator not heating
Equipment failure is one of the main reasons why the bubble film inflator does not heat up.
1. Check if the power socket is loose or burnt out. If it is damaged, replace the corresponding socket.
2. Check if the power cord is short-circuited or broken. If it is, replace the power cord or repair the power cord.
3. Check if the machine switch is normal. If the machine is not damaged, turn it on normally. Otherwise, replace the switch.
Insufficient power supply is another reason why the bubble film inflator does not heat up.
1. Check if other electrical appliances cause voltage drop when in use. If so, disable other electrical appliances or use a pressure reducer to increase the power supply voltage.
2. Replace a high-power power supply and increase the power supply voltage so that the bubble film inflator can work normally.
Solution to the problem of the material breaking of the bubble film machine
Cause of the problem
When producing bubble film, the stretching and sudden breakage of the material is one of the common reasons for the machine to stop. The problem of the material breaking of the bubble film machine is usually caused by the following reasons:
1. Improper operating parameters of the bubble film machine. If the operator is not familiar with the operation method of the bubble film machine, the wrong parameter settings may be made, such as stretching speed is too fast or too slow, temperature is too high or too low, etc. These problems may cause the bubble film machine material to break.
2. Poor quality of raw materials. The problem of the material breaking of the bubble film machine may also be caused by the poor quality of raw materials. For example, uneven material tension, inconsistent diameter, uneven edges, etc. may cause the material breaking of the bubble film machine.
3. Equipment failure. If the mechanical parts of the bubble film machine are damaged or the air circuit system is faulty, it will also cause the material breaking of the bubble film machine.
Problem Solving Methods
For the problem of the material breaking of the bubble film machine, it can be solved from the following aspects:
1. Adjust the operating parameters of the bubble film machine to meet the requirements of the material, such as: adjust the stretching speed, heating temperature, etc.
2. Optimize the quality of raw materials, choose better suppliers, and ensure the quality of raw materials.
3. Carry out inspection and maintenance of the bubble film machine, solve equipment failures in time, and keep production log records.
4. Develop a set of production optimization measures, such as increasing the strength of the machine body, deepening the overall depth of the machine, etc., and adjust them according to actual conditions.
5. Train and manage operators to improve their ability to deal with the problem of the material breaking of the bubble film machine.
During the use of bubble film bag making machine, bubble film sometimes gets stuck. How to solve this problem?
1. Check whether the bubble film is clean and adjust the tension appropriately.
2. Check whether the material calling mechanism is stuck and clean it appropriately.
3. Check whether the sensor has interference and re-debug after eliminating the interference.
Loose sealing
Loose sealing is one of the common problems of bubble film bag making machine. How to avoid loose sealing?
1. Adjust the temperature of the sealing mechanism to ensure that the heat sealing temperature reaches the standard value.
2. Adjust the distance between the pressure wheel and the sealing wheel to ensure that the sealing line is vertical.
3. Replace the sealing line. If the sealing line is severely worn, it needs to be replaced in time.
Insensitive shearing mechanism
Insensitive shearing mechanism is one of the common problems of bubble film bag making machine. When this happens, how do we solve it?
1. The shearing mechanism bearing needs to be lubricated with lubricating oil appropriately.
2. Maintain and replace the shear blade.
3. Clean the bubble film residue around the shearing nozzle in time.
Unstable machine operation
Unstable machine operation is one of the problems that bubble film bag making machines need to pay attention to. How to solve this problem?
1. Check the air pressure regulator to ensure that the regulator works well.
2. Check the machine connection to ensure that the connection is not loose or leaking.
3. Clean the inside of the machine in time and pay attention to replacing damaged parts at any time.
